With the device successfully connected in COM 1.0 mode, the tool must be configured to point to the correct factory firmware parameters.
Download and extract the official IDT 2.0 software package to a recognizable directory (e.g., C:\IDT ).
Ensure the COM port number matches the exact port number assigned to the Huawei USB COM 1.0 device in your Windows Device Manager.
Provides the standard ADB and Fastboot drivers required during the secondary phases of boot recovery. 3. Board Firmware (Factory ROM)
: Windows 10 or Windows 11 (64-bit systems require disabling Driver Signature Enforcement).
When a Huawei device suffers from a corrupted partition table, an interrupted official update, or a bad custom ROM flash, it often enters a "hard-bricked" state. In this state, the screen remains black, and standard button combinations fail to trigger Fastboot or Recovery modes. IDT 2.0 bridges this gap by flashing the essential boot images needed to revive the device hardware. Key Features of IDT 2.0
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Assemble the phone housing sufficiently to safely press the power button.
Once complete, the progress status bar will turn green and display a , Passed , or 100% Download Completed message. Step 6: Post-Flash Reboot Safely disconnect the USB cable from your phone.
The IDT tool functions by communicating with the DBAdapter/PCUI port, which appears in Windows Device Manager when a Huawei device is in USB SER mode (commonly accessed via testpointing, which involves shorting specific points on the motherboard).The tool sends a loader, then validates the images before flashing them to the internal eMMC/UFS storage. Pre-requisites for Using IDT 2.0
Huawei Image Deployment Tool (IDT) 2.0 is a specialized utility used primarily for flashing board software and low-level firmware onto Huawei devices. Unlike standard consumer tools, it is often utilized for device recovery (unbricking) and factory-level servicing. Overview of IDT 2.0
Flashing with IDT 2.0 involves a specific sequence to ensure the hardware is correctly identified and the software is safely written. Preparation Install the necessary Huawei USB COM 1.0 drivers
Once the progress bar hits 100%, the log window will display a green or "Downloading Completed" notification. Disconnect the USB cable from the phone. Reconnect the physical battery cable to the motherboard.
Specifically designed to revive devices that are stuck in a boot loop or completely "dead" (hard-bricked).
Using low-level factory software utilities like Huawei IDT 2.0 carries inherent risks. Modifying hardware states via test points and writing raw partition images can permanently damage your device if executed incorrectly. This software is intended for advanced technicians. Ensure you back up any critical data if your device retains any functionality before attempting these steps, and proceed at your own discretion. To help tailor this guide further, let me know:
: With a click of the "Start" button, a progress bar began to crawl across the screen. This was the "flashing" process, where IDT 2.0 etched new firmware directly into the device's non-volatile flash memory. The Success