If the model features alarm functionality, this parameter sets the upper or lower limit alarm value. 4. Key Functions and Troubleshooting
: Core components are rated for a service life of approximately 210,000 cycles , making it a long-term solution for industrial applications. Key Technical Specifications Specification Temperature Range 0–400°C (standard) Input Signals Supports K, E thermocouples and RTD (Pt100, Cu50) Control Method Three-position relay on-off or time proportional control Output Type Relay contact (220V AC, 3A resistive) Panel Dimensions 72 x 72 mm (Hole size: 68 x 68 mm) Power Supply AC 220V/380V, 50/60Hz Setup and Maintenance Insights
I can provide the exact terminal layout adjustments or parameter adjustments for your specific system.
| Terminal Number | Function | Description | | :--- | :--- | :--- | | | Sensor Input | Connect the Thermocouple or RTD here. (Polarity matters for Thermocouples). | | 3 & 4 | Control Output | Normally Open (NO) Relay contacts. These act like a switch to turn your heater on/off. | | 90 & 91 (or 9 & 10) | Power Supply | Connect power (typically 110VAC or 220VAC). Check the label voltage! | xmtd-2201 manual
: The relay is energized when the measured temperature is lower than the set value.
The XMTD-2201 has various sub-models (like -F1 , -E 400.c , -K 1300.c ), each with specific inputs and functions. Always check the label on your specific device.
Hold the 'SET' button for 3 seconds to enter the menu for adjusting proportional band, integration, and differentiation times. If the model features alarm functionality, this parameter
The Manual You Didn’t Know You Needed: Decoding the XMTD-2201
Proper wiring is critical for safety and accuracy. Always disconnect power before handling terminals.
The XMTD-2201 handles heavy-duty industrial tasks within a square form factor. AC 220V ±10%, 50/60 Hz. Power Consumption: ≤ 3 Watts. Display Accuracy: ≤ 1.0% Full Scale ±1 Digit. | | 3 & 4 | Control Output
Press the key briefly once under normal operating mode. The SV display text will begin to blink or glisten, indicating it is editable.
Thermocouples (K, J, E, S, T) and RTDs (Pt100, Cu50)
