Satlink Ws-6906 Software Upgrade

Set the (typically 115200, though some firmware versions require 9600).

Remember the golden rules: Whether you are a pro installing multi-feed systems or a hobbyist tracking feeds, a current WS-6906 is a reliable partner.

: The official updater software used to communicate with the meter.

This is the most common method for older revisions and deep system updates. satlink ws-6906 software upgrade

: Supported on Windows XP, 2000, ME, or 98SE. Newer Windows versions may require compatibility mode or specific drivers if using a USB-to-RS232 adapter. Software Tools : You will need the SatlinkTools program or a similar Updater & Channel Editor Step-by-Step Instructions Connect the Device

: Open the SatlinkTools application. If using Windows 7 or higher, right-click and select Run as Administrator .

Follow these steps precisely to avoid interrupting the data transfer. 1. Prepare the Hardware Connections Keep the Satlink WS-6906 powered . Plug the 3.5mm jack into the meter's serial port. Connect the DB9 end to your PC (or USB adapter). Set the (typically 115200, though some firmware versions

The Satlink WS-6906 is a standard definition (DVB-S) satellite meter. Because satellite frequencies change frequently, an outdated database causes the meter to miss active signals. : Resolves system freezes and lock-up issues.

(Deducting points for the cumbersome installation method, but praising the resulting stability).

The official method using the device's USB port, which is straightforward when the original USB cable is available. This is the most common method for older

Turn on your WS-6906. Press the button. Navigate to System Settings -> System Information . Write down the current version (e.g., V3.07_20221012 ). This helps you confirm the upgrade worked.

: Be cautious when using third-party firmware. Using a version meant for a different hardware revision can cause the "Lock" light to stay on permanently, rendering the device inoperable.

Follow these steps precisely. The process involves entering "Download Mode" on the WS-6906.

Several users have successfully upgraded their devices with encouraging results: