More

    Merlin Gerin Multi 9 Ic 2000 P Manual

    It offers a "back-lit LCD screen" and "sealed swivel cover" for easy manual override and programming adjustments without opening the panel.

    Press the P button. The screen will display 1 (Program 1) and a flashing clock.

    By adhering closely to these wiring and programming guidelines, the Merlin Gerin Multi 9 IC 2000 P twilight switch will provide maintenance-free, energy-efficient automation for your lighting infrastructure for years to come.

    The Schneider Electric Support Center for technical FAQs regarding the IC2000P+. Merlin Gerin Multi 9 Ic 2000 P Manual

    Do you need assistance with a or a particular type of lamp load (e.g., LED, fluorescent)?

    The first pages of the manual guide you through the physical installation of the device on a standard DIN rail. It emphasizes the importance of:

    The device front panel features several buttons for manual control and configuration: www.electricline.ru It offers a "back-lit LCD screen" and "sealed

    Lower values mean the lights turn on only when it is very dark. 4.3. Programming Automatic Times (PROG) Rotate the dial to PROG . Select the channel. Set the ON times and OFF times.

    If the connected lighting load exceeds 16A without a supplementary power contactor, the internal relay contacts may have fused together.

    16A at 250V AC (for resistive loads). For higher power, it is recommended to use a contactor. 🛠️ Installation Highlights Mounting: Designed for standard TH35 DIN rail mounting. By adhering closely to these wiring and programming

    The IC2000 P is discontinued. Direct replacements from Schneider Electric include:

    The IC 2000 P (part of the Schneider Electric/Merlin Gerin Multi 9 range) is a or 2-channel digital time switch designed to handle various loads. Its main purpose is to optimize energy consumption by turning circuits on and off automatically at predefined times. Key Technical Features: Operating Voltage: 230V AC Capacity: 16A or 10A (depending on load type) Program Channels: 1 (IC 2000 P) or 2 (IC 2000 P2)

    Move the sensor out of the direct beam path of the controlled lighting. 6. Maintenance and Care