First, let’s clarify what you are holding. The RC-799M is the standard-issue infrared (IR) remote control for several of Onkyo’s mid-to-high-end AV receivers manufactured during the late 2000s and early 2010s.
is compatible with a wide range of Onkyo home theater systems and receivers, including:
Onkyo AV receivers and home theater packages
Have a specific question not covered? Check the Onkyo community forums or leave a comment below. Your RC-799M remote should serve you for another decade with proper care. onkyo rc-799m remote manual
Press the Receiver button on the remote before pressing any other function keys. If you previously pressed "TV/CD" or "BD/DVD", the remote is trying to send commands to those devices instead of the receiver.
Press the HOME button on the remote to display the setup menu on your TV screen.
Before diving into programming, here is a quick breakdown of the physical hardware: RC-799M (Part Number: 24140799) Signal Type: Infrared (IR) Battery Type: Two AA batteries (alkaline recommended) First, let’s clarify what you are holding
buttons for about 3 seconds until the remote's indicator light stays lit. Input Code : Within 30 seconds, enter the 5-digit remote control code for your device using the number buttons. : If the code is accepted, the Remote Mode button will flash twice : Point the remote at the device and press the button to verify it turns on or off. Quick Reset & Troubleshooting If the remote is unresponsive or glitchy, try these steps:
Direct sunlight, bright fluorescent lighting, or plasma TV screens can flood the room with IR light and interfere with the remote signal. Only Some Buttons Work
Press and hold down the remote mode button and the HOME button at the same time. Check the Onkyo community forums or leave a comment below
Onkyo RC-799M is a dedicated audio/video receiver remote. While it works instantly with many Onkyo receivers right out of the box, you may need to program it to control other devices like your TV. Amazon.com Programming Instructions
Look up the 5-digit remote control code for your specific brand and device type (refer to the code categories below).
