Systec It3 User Manual ((full))
Uses a tolerance zone (Under / OK / Over) to quickly audit packages on a conveyor line, lighting up external status lamps or activating reject arms.
Entry impedance 43 Ohm to 3.3 kOhm (supports up to 8 x 350 Ohm cells) 524,000 d max (W&M approved up to 10,000 d) Core Preinstalled Operating Modes
Place a certified test weight on the scale (ideally at least 80% of Max capacity). Input the exact value of the test weight into the terminal, then press enter to store the calibration span. 5. Software Customization and Applications
The standard IT3 is a universal industrial weighing terminal. It's a comprehensive unit with an integrated display and keyboard, designed for challenging environments with high hygiene requirements, such as food, pharmaceutical, and chemical industries. Key features include:
Place a certified test weight on the scale (ideally >50% capacity). Enter the weight value into the IT3 terminal. systec it3 user manual
Visually inspect the scale base for debris buildup, which can cause mechanical binding and lead to weighing inaccuracies.
Stainless steel, IP69K ingress protection, integrated cable glands
When physical weights are unavailable, configuration parameters allow engineers to input the nominal cell sensitivity rated values (mV/V) directly. Enter individual load values derived from the manufacturer's load cell testing sheets to construct an idealized linear response curve. 3. Linearization of Load Curves
When you power up the IT3, it undergoes a self-test. Once the weight display appears, ensure the "Center of Zero" indicator is lit before placing any load on the platform. 3. Configuration & Calibration Uses a tolerance zone (Under / OK /
Support, Spare Parts, and Documentation Contact channels for manufacturer support, recommended spare parts with part numbers, and links or references to supplementary documents (schematics, PCB layouts, compliance certificates) complete the manual’s lifecycle support. A clear warranty and service policy section sets expectations about responsibility and response times.
The IT1/3 needs an additional module (alibi memory) for storage => ASM. Interface can be Serial or Ethernet. When ethernetis used,
: Designed to sit cleanly flush inside an automated switch cabinet or system console. Cable Ingress & Sealed Connections
Unboxing checklist, mounting (rack, DIN, desktop), clearance and ventilation, grounding instructions. Powering on sequence and recommended first‑boot grounding checklist. Key features include: Place a certified test weight
Note: Calibration should only be performed by authorized scale technicians to maintain legal-for-trade certification.
High-contrast backlit LCD for easy reading in low light.
Use the alphanumeric keypad to enter batch numbers, product IDs, or target weights. The key confirms selections, while ESC returns to the previous menu. 📊 Standard Application Programs
Calibration must be completed by an authorized weights and measures technician if legal-for-trade certification is needed.