Nalco 77225 Safety Data Sheet Full ((top)) Jun 2026

Spills must be handled by trained personnel using appropriate PPE:

Keep away from strong acids and reactive metals (such as aluminum or zinc) to prevent chemical degradation or gas generation.

The full SDS provides a clear hazard classification in accordance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and GHS (Globally Harmonized System).

Use isolated chemical feed pumps and enclosed piping systems. Install local exhaust ventilation over chemical open-tanks, and ensure an emergency eyewash station and safety shower are located near the chemical dosing skid. Required Personal Protective Equipment (PPE) nalco 77225 safety data sheet full

If swallowed, rinse the mouth but do not induce vomiting. If on skin, immediately strip contaminated clothing and rinse skin with water. If inhaled, move the individual to fresh air. If in eyes, rinse cautiously with water for several minutes.

Spills of this corrosive chemical require a careful response.

[ GHS Signal Word: DANGER ] ├── Physical Hazard: May be corrosive to metals (Category 1) ├── Health Hazard: Causes severe skin burns (Category 1) └── Health Hazard: Causes serious, irreversible eye damage (Category 1) Core Hazard Statements May be corrosive to metals. H314: Causes severe skin burns and eye damage. Key Precautionary Statements Spills must be handled by trained personnel using

When designing chemical feed loops, use compatible materials like Neoprene, EPDM, Butyl Rubber, and Stainless Steel. Avoid PTFE for mechanical shaft or plunger seals, as it can experience accelerated degradation when exposed to this formulation. 11. Toxicological Information Nalco 77225 SDS (GHS) | PDF | Toxicity - Scribd

Store NALCO 77225 in a cool, dry, and well-ventilated warehouse space. Keep containers tightly closed when not in use.

Chemical splash goggles or a full-face shield to prevent eye contact. If inhaled, move the individual to fresh air

If accidental contact or exposure occurs, prompt action is critical to prevent tissue damage.

Contain spill with dikes or non-combustible absorbent material (sand, earth, vermiculite). Neutralize carefully with a weak acid if permitted by local regulatory permissions, collect into designated containers, and dispose of via a licensed waste handler. 7. Handling and Storage

Engineering controls are the first line of defense, supplemented by robust PPE protocols. Control Parameters