Contains epoxy resin polymers and active pigments.
: Contains cross-linking amines capable of causing intense chemical burns on prolonged dermal contact.
Store the product in its original, tightly sealed containers in a cool, dry, and well-ventilated area. Keep the containers away from direct sunlight, open flames, heat sources, and incompatible materials (such as strong oxidizing agents). Ecological Information
for a different environment. Find more specific chemical resistance data.
Can cause severe irritation or allergic reactions. Wash thoroughly with soap and water; do not use solvents to clean the skin. nitocote nt402 msds
The MSDS lists distinct hazards for the raw chemical components before they fully cure. The product carries a or Warning signal word depending on the component, displaying the standard GHS pictograms for health hazards, corrosivity, and environmental toxicity. Key Hazard Statements (H-Phrases) H315: Causes skin irritation. H317: May cause an allergic skin reaction (sensitization). H319: Causes serious eye irritation.
Eye Damage: Splashes can cause permanent eye injury or severe irritation.
For the EU: Complies with REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) and CLP (Classification, Labelling, and Packaging).
| Property | Value | |----------|-------| | Appearance | Viscous liquid | | Odor | Slight amine-like (Part B) | | pH (mixed) | ~9–10 (alkaline) | | Viscosity (mixed) | 750–1000 cP | | Density | ~1.10–1.20 g/cm³ | | Solubility in water | Miscible (water-based system) | | VOC content | <50 g/L (low VOC) | Contains epoxy resin polymers and active pigments
It resists abrasive environments and does not support bacterial growth. Nitocote NT402 Technical Properties
Nitocote NT402 is a commercial protective/coating product (epoxy/polyurethane-based protective coating). Use, storage, and handling follow standard practices for industrial coatings — avoid ignition sources, skin and eye contact, and inhalation of vapors or spray aerosols.
Both the base and hardener are irritants. Direct, unprotected skin contact can cause rashes, dermatitis, or severe burns (due to the hardener).
A: It is recommended for use down to 5°C. Materials should be stored in a heated area until immediate use. Keep the containers away from direct sunlight, open
The MSDS confirms that Nitocote NT402 is not a chronic health hazard in normal handling, but acute exposure is dangerous.
Nitocote NT402 is a widely used coating material in various industries, including construction, oil and gas, and manufacturing. As with any chemical substance, it is essential to handle and use Nitocote NT402 safely and responsibly. One crucial document that provides vital information on the safe handling, use, and storage of Nitocote NT402 is the Material Safety Data Sheet (MSDS). In this article, we will discuss the significance of Nitocote NT402 MSDS, its contents, and how to obtain and use it.
The formulation combines inert fillers and polymers.It includes specific chemical resistant curing agents.The MSDS lists exact chemical abstract numbers (CAS). 4. First-Aid Measures : Flush immediately with plenty of water. Skin Contact : Wash thoroughly with soap and water. Inhalation : Move the victim to fresh air. Ingestion : Do not induce vomiting; seek medical help. 5. Fire-Fighting Measures
The Nitocote NT402 MSDS is crucial for several reasons: