Therefore, treat this version as the . Once installed, you can safely ignore future update prompts unless they come directly from a Renault dealer.
If your car is currently running firmware version 7.x or 8.x, you can typically upgrade directly to V9.
R-Link 2 is Renault’s second-generation connected infotainment system, powered by a QNX operating system (not Android). It debuted around 2015 and received periodic updates until 2022. Version sits among the final major stable releases, preceding the ultimate 9.0.35.600 patches.
9) — Обновление мультимедийной системы R-LINK 2
One of the most reported issues with earlier R-Link 2 firmware (versions 2.x, 8.x) was GPS signal dropouts, especially in urban canyons or near tunnels. Version 9.0.35.50x introduces improved GPS satellite acquisition algorithms. Users report: R-link 2-software Version 9.0.35.50x
is often required to reach version 7 before moving to version 9. Boot Version
Wait a few seconds. A prompt should appear on the screen stating: "Software update found. Do you want to install?" Tap or OK .
If the screen fails to turn back on after 20 minutes, perform a hard reset. Press and hold the power button for 15–20 seconds. If the system remains unresponsive, disconnect the vehicle battery's negative terminal for 10 minutes to clear the cache. Navigation Maps Disappeared
Ensure the update files are placed directly in a folder named R-LINK on the root directory of the drive. 2. Apple CarPlay / Android Auto is Not Full Screen Therefore, treat this version as the
: This version enhances how speed camera locations and mobile radar alerts are displayed. These alerts are now more consistently mirrored across the main screen, the instrument cluster, and the Head-Up Display (HUD) .
To update your R-link 2 system to version 9.0.35.50x, follow these steps:
The system will restart several times.
Fixes the black bars on vertical 8.7-inch screens. Kadjar | Full features
| Hardware ID | Vehicle examples | Notes | |-------------|------------------|-------| | H2 | Megane IV, Talisman, Kadjar | Full features, wireless AA | | H3 | Clio V (early), Captur II (pre-facelift) | No wireless AA | | L2 | Dacia Sandero III, Logan III | Reduced resolution, no TomTom traffic | | R2 | Alpine A110 | Specific audio tuning |
Before diving into the specifics of version 9.0.35.50x, let’s establish a baseline. R-Link 2 is Renault’s second-generation connected infotainment system, launched around 2014-2015. Unlike the entry-level R&Go or the later Android-based OpenR Link (found in the Megane E-Tech Electric), R-Link 2 is a Linux-based system that powered vehicles such as:
Obtain a high-quality USB flash drive (16GB or 32GB recommended).
Therefore, treat this version as the . Once installed, you can safely ignore future update prompts unless they come directly from a Renault dealer.
If your car is currently running firmware version 7.x or 8.x, you can typically upgrade directly to V9.
R-Link 2 is Renault’s second-generation connected infotainment system, powered by a QNX operating system (not Android). It debuted around 2015 and received periodic updates until 2022. Version sits among the final major stable releases, preceding the ultimate 9.0.35.600 patches.
9) — Обновление мультимедийной системы R-LINK 2
One of the most reported issues with earlier R-Link 2 firmware (versions 2.x, 8.x) was GPS signal dropouts, especially in urban canyons or near tunnels. Version 9.0.35.50x introduces improved GPS satellite acquisition algorithms. Users report:
is often required to reach version 7 before moving to version 9. Boot Version
Wait a few seconds. A prompt should appear on the screen stating: "Software update found. Do you want to install?" Tap or OK .
If the screen fails to turn back on after 20 minutes, perform a hard reset. Press and hold the power button for 15–20 seconds. If the system remains unresponsive, disconnect the vehicle battery's negative terminal for 10 minutes to clear the cache. Navigation Maps Disappeared
Ensure the update files are placed directly in a folder named R-LINK on the root directory of the drive. 2. Apple CarPlay / Android Auto is Not Full Screen
: This version enhances how speed camera locations and mobile radar alerts are displayed. These alerts are now more consistently mirrored across the main screen, the instrument cluster, and the Head-Up Display (HUD) .
To update your R-link 2 system to version 9.0.35.50x, follow these steps:
The system will restart several times.
Fixes the black bars on vertical 8.7-inch screens.
| Hardware ID | Vehicle examples | Notes | |-------------|------------------|-------| | H2 | Megane IV, Talisman, Kadjar | Full features, wireless AA | | H3 | Clio V (early), Captur II (pre-facelift) | No wireless AA | | L2 | Dacia Sandero III, Logan III | Reduced resolution, no TomTom traffic | | R2 | Alpine A110 | Specific audio tuning |
Before diving into the specifics of version 9.0.35.50x, let’s establish a baseline. R-Link 2 is Renault’s second-generation connected infotainment system, launched around 2014-2015. Unlike the entry-level R&Go or the later Android-based OpenR Link (found in the Megane E-Tech Electric), R-Link 2 is a Linux-based system that powered vehicles such as:
Obtain a high-quality USB flash drive (16GB or 32GB recommended).