The standard defines four main types of certificates. They fall into two main categories: non-specific inspection and specific inspection. Non-Specific Inspection Documents
| Feature | | Type 2.2 | Type 3.1 | Type 3.2 | | :--- | :--- | :--- | :--- | :--- | | Document Name | Declaration of Compliance | Test Report | Inspection Certificate 3.1 | Inspection Certificate 3.2 | | Issued By | Manufacturer | Manufacturer | Manufacturer's Authorized Inspector | Manufacturer & Independent Third Party | | Test Basis | Manufacturer's Responsibility | Non-specific Inspection | Specific Inspection | Specific Inspection | | Third-Party Witnessing | No | No | No | Yes | | Traceability (Heat/Lot) | No | Not guaranteed | Yes | Yes | | Relative Cost | Lowest | Low | Moderate | Highest (10-30% > Type 3.1) | | Lead Time Impact | None | Minimal | +1-2 weeks | +1-3 weeks |
Disclaimer: This article is for informational purposes. Always verify EN 10204 documents with the issuing body for critical applications. en 10204 pdf hot
Understanding EN 10204 PDF: A Complete Guide to Hot Rolled Material Certification
The current and valid version is EN 10204:2004 . The standard defines four main types of certificates
The highest level of certification. It requires the manufacturer to issue a 3.1 certificate, which is then validated by an independent third-party inspector (e.g., TÜV, Lloyd’s Register) or the buyer's authorized inspector. Why "EN 10204 PDF Hot" Matters
Many steel mills (ArcelorMittal, Tata Steel, SSAB) publish sanitized example EN 10204 3.1 PDFs on their websites. Search for: Always verify EN 10204 documents with the issuing
EN 10204 3.1 Vs 3.2 — Free Certificate Checklist (PDF Guide)
Hot-finished tubes and pressure vessel plates experience intense stress and temperature shifts. Regulations like the Pressure Equipment Directive (PED) mandate EN 10204 Type 3.1 or 3.2 certificates. These documents verify specific impact energy and tensile strength data. Automotive and Manufacturing Parts
The standard reduces the number of inspection documents to four clear types, following a revision in 2004 that deleted older types like 2.3, 3.1A, 3.1B, and 3.1C. The four types are .
Let’s break it down: