Use the click-wheel or adjustment screw to position the first infrared line. The safety curtain must be adjusted so that it sits as close to the moving door leaf as possible without hitting it.
Usually involves an 8-wire connection to the door controller, covering power, activation output, and safety output Made-in-China.com Maintenance Tips
Press the button on the circuit board once. The LED will flash rapidly in green and red. Step completely out of the detection zone for 10 seconds.
Have a specific question about your Opti Combi that the manual didn’t answer? Drop a comment below, and our community might be able to help. prosecure opti combi manual english
| Parameter | Value | |-----------|-------| | Power supply | 400V 3N ~ 50/60 Hz | | Max power | 9 – 18 kW (model dependent) | | Chamber capacity | 6x GN 1/1 (up to 20 kg food) | | Water pressure | 1 – 6 bar (dynamic) | | Drain connection | DN40, gravity drain | | Weight | 95 – 160 kg |
A: You likely used Hot Air without proper fan speed adjustment. Reduce temp by 20°C or switch to Combi with 30% humidity.
The is a specialized combined sensor designed for automatic sliding doors, integrating radar for movement activation and active infrared for threshold safety. Overview of Functionality Use the click-wheel or adjustment screw to position
The of the door controller you are connecting to
Connect the cable according to the color-coded scheme (e.g., white/brown for power, green/yellow for activation output, and blue/red for safety output). It must be operated from a SELV (Safety Extra Low Voltage) supply.
The is a high-performance combined sensor from dormakaba (formerly DORMA) designed specifically for automatic sliding doors . It integrates two detection technologies into a single unit: radar for motion-based activation and Active Infrared (AIR) for presence-based threshold safety. This dual functionality ensures compliance with safety standards like EN 16005 . Installation Overview The LED will flash rapidly in green and red
: Normally Open (NO) / Normally Closed (NC) relay contact Configuration and Adjustments
The manual walks you through entering the (default is often 0000 or 1234 —but change it immediately!). You’ll learn how to:
ProSecure Opti Combi Manual: Complete English Installation and Programming Guide
Everything you need to visualize and present real estate projects with CGI.
Get expert insights, real project examples, and visualization strategies that boost client approval and sales.
Fill out the form to receive the guide directly in your inbox.