Place the DigiPro on a known flat surface or the designated calibration block.
Reset the unit by removing the battery for 60 seconds, then perform a flat calibration. 6. Best Practices for Maintenance
Clean the blades and hinges carefully. Check for physical burrs on the measuring edges.
: Sends measured angle data directly to the press brake's NC (Numerical Control) via infrared, eliminating the need for manual data entry. amada digipro manual
Here are some technical specifications of the Amada DigiPRO machine:
BEND THE PAST.
Most units come in a protective case. Always store the DigiPro in its case when not in use to protect the precision edges and electronic components from workshop debris. Place the DigiPro on a known flat surface
Instead of an operator bending a part, removing it, checking it with a manual protractor, and guessing the correction value, the DigiPro automates the cycle: The operator performs a trial bend. The DigiPro measures the actual angle of the bent part. The measurement data is sent directly to the CNC control.
Interchangeable measuring blades designed to fit into different V-die widths.
tucked into the side pocket of the control console. To many, it was just a technical booklet of diagrams and specifications, but to Elias, it was the " Bender’s Bible The Discovery Best Practices for Maintenance Clean the blades and
Understanding the hardware components is the first step to successful operation. A standard DigiPro kit includes:
The DigiPro typically operates on standard standard consumer batteries (such as 9V or AA, depending on the generation).
The is a high-precision electronic protractor designed to work with Amada press brakes to ensure accurate bending angles . By measuring the part and wirelessly transmitting the data to the machine control, it automatically calculates and applies the necessary corrections for springback and material variations. Key Features & Functionality
The specific you are encountering.
Verify the device against a master machinist square at the start of every shift.