Remove the back cover and for 5 seconds, then reinsert it (do not power the phone on).
Follow the on-screen instructions to complete the installation.
For this model, the Miracle Tool (v2.82 or later) or the Avenger Spreadtrum Module are highly recommended for stable results.
No. The Nokia 105 series are feature phones that do not run the Android operating system. Flashing can only reinstall the phone's proprietary OS, not upgrade it to a different platform. nokia 105 ta-1174 flash tool download
Need more help? Visit GSM forum threads dedicated to "Nokia TA-1174 unbrick" – the community is active and helpful.
Open the SPD Upgrade Tool , click on the "Load Packet" (gear icon), and select the firmware .pac file you downloaded.
—they often contain malware. Below are the legitimate sources or names you need to search for via trusted GSM forum communities (like GSM-Forum, Gsmhosting, or Mediafire premium links ). Remove the back cover and for 5 seconds,
Disclaimer: Flashing firmware can erase all data on your device. Ensure your phone is charged and back up any important contacts or messages before proceeding. Follow all steps carefully to avoid bricking your device. Nokia 105 TA-1174 Flash Tool Download & Flashing Guide Nokia 105 (TA-1174)
No – full flash always reformats the file system. Back up using a microSD card; games scores are usually lost.
Connect the phone to your PC via a USB cable while holding the key. Need more help
(Examples of commonly indexed sources — verify file contents and integrity before use)
: The SPD Upgrade Tool (Research Download) or the Avenger Spreadtrum module .
Try changing the USB port. Always use a rear motherboard USB port if you are using a desktop PC. Avoid using external USB hubs.
(also known as Spreadtrum Upgrade Tool) is the standard software used for this model. Some technicians also use specialized tools like the Pandora Tool R21 Avenger Box for security resets. Flash File (Firmware) : You must download the specific Nokia 105 TA-1174 Stock ROM (usually a USB Drivers : Install the SPD USB Drivers
Wait for the progress bar to reach 100% and display a or "OK" message. Step 5: Finalization Disconnect the USB cable from the phone. Remove the battery, reinsert it, and turn on the device.