Canon Service Tool V3200 !new!

Connect the printer to your computer using a . (Wi-Fi will not work for this process).

The is a specialized software utility designed to resolve these maintenance locks. This guide explains what the software does, how to use it safely, and how to troubleshoot common connection errors. What is Canon Service Tool v3200?

The power and alarm LEDs blink alternately in a specific sequence (usually 7 or 8 times).

The is a specialized Windows application. It communicates directly with the printer’s firmware to reset the Waste Ink Counter back to 0%, immediately clearing the lockout error. Key Features

The tool provides access to functions not available in standard printer drivers: canon service tool v3200

For newer Canon models released after 2015, you will likely need a more modern service tool, such as the V3400 or V4720.

While holding the Stop button, press and hold the button. Release the Stop button (keep holding the Power button).

The Canon Service Tool v3200 (frequently abbreviated as ST v3200) is an official proprietary software used by Canon technicians and service centers. It interfaces with Canon Pixma and Maxify series printers when they enter a specialized diagnostic state called .

If you encounter issues while using the Service Tool, refer to this troubleshooting table: Connect the printer to your computer using a

The V3200 software only resets the digital memory . It does not remove the actual wet ink from the sponge. If you reset the counter to zero but the pad is physically full, the next cleaning cycle will cause ink to overflow inside the printer. This ink can:

Canon programs the printer to stop working after a specific number of purge cycles (roughly 5,000 to 8,000 pages). This is not because the pad is actually full—often, the pad is only 20-30% saturated. Canon does this for two reasons:

Press the Stop button 5 times in a row, then release the Power button.

Press and hold the Stop/Reset button (red triangle icon). This guide explains what the software does, how

The Canon Service Tool is a maintenance utility provided by Canon for its authorized service centers. It is designed to interact directly with the printer's EEPROM (Electrically Erasable Programmable Read-Only Memory) to perform maintenance tasks, such as:

: Generates diagnostic pattern prints to check hardware health. Supported Canon Printer Models

Turn off your printer using its physical power button. (It may take a few seconds to shut down completely).